ViewSonic PJL7211 User Manual Download

Page: 59 / 71

PJL7211

ViewSonic

Troubleshooting

If an abnormal operation should occur, stop using the projector immediately.

Otherwise if a problem occurs with the projector, the following checks and measures are

recommended before requesting repair.

If this does not resolve the problem, please contact your dealer or service company. They

will tell you what warranty condition is applied.

►Never use the projector if abnormal operations such as smoke, strange odor,

excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter,

etc. should occur. In such cases, immediately disconnect the power plug from the power outlet. After

making sure that the smoke or odor has stopped, contact to your dealer or service company.

WARNING

Related messages

When some message appears, check and cope with it according to the following table.

Although these messages will be automatically disappeared around several minutes, it will

be reappeared every time the power is turned on.

Message

Description

There is no input signal.

Please confirm the signal input connection, and the status

of the signal source.

The horizontal or vertical frequency of the input

signal is not within the specified range.

Please confirm the specs for your projector or the signal source specs.

An improper signal is input.

Please confirm the specs for your projector or the signal source specs.

The internal temperature is rising.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After having confirmed the

following items, please turn the power ON again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

A note of precaution when cleaning the air filter.

Please immediately turn the power off, and clean or change

the air filter referring to the “Cleaning and replacing the

air filter” section of this manual. After you have cleaned or

changed the air filter, please be sure to reset the filter timer.

The button operation is not available with following

condition.

One of the invalid buttons on the remote control was

pressed.

Summary of Contents for PJL7211








































































Search results

Summary of Contents for PJL7211

Reviews:

Related manuals for PJL7211

Brands by name

Popular brands

ViewSonic PJL7211, User Manual

Search results

Summary of Contents for PJL7211

Reviews:

Related manuals for PJL7211

Brands by name

Popular brands