background image

PJL7211

ViewSonic

9

Operating

• The zoom level can be finely adjusted. Closely watch the screen to 

find the level you want.

NOTE

1.

Press the 

ON

 button of 

MAGNIFY

 on the remote control.  

The “MAGNIFY” indication will appear on the screen and the 

projector will go into the MAGNIFY mode. When the 

ON

 button 

of 

MAGNIFY

 is pressed first after the projector is started, the 

picture will be zoomed twice. The indication will disappear in 

several seconds with no operation.

Using the magnify feature

2.

Use the ▲/▼ cursor buttons to adjust the zoom level.   

To move the zoom area, press the 

POSITION

 button in the MAGNIFY mode, then 

use the ▲/▼/◄/► cursor buttons to move the area. And to finalize the zoom 

area, press the 

POSITION

 button again.

To exit from the MAGNIFY mode and restore the screen to normal, press the 

OFF

 

button of 

MAGNIFY

 on the remote control. 

●  The projector automatically exits from the MAGNIFY mode when the input signal 

is changed or when the display condition is changed. 

●  In the MAGNIFY mode, the keystone distortion condition may vary, it will be 

restored when the projector exits from the MAGNIFY mode.

1.

Press 

KEYSTONE

 button on the remote 

control. A dialog will appear on the screen to 

aid you in correcting the distortion.

Correcting the keystone distortions

2.

Use the ◄/► buttons for adjustment.

To close the dialog and complete this operation, press 

KEYSTONE

 button again. Even if you do not do anything, the 

dialog will automatically disappear after a few seconds.

●  The adjustable range of this function will vary among inputs. For some input, this 

function may not work well.

●  When the projector is inclined to near ±30 degree or over, this function may not 

work well.

MAGNIFY

ON/OFF

 button

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH BLANK

MUTE

MY BUTTON

POSITION

1

2

ESC

ENTER

MENU

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

      UP

VOLUME

DOWN

ON

OFF

FREEZE

KEYSTONE

 button

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH BLANK

MUTE

MY BUTTON

POSITION

1

2

ESC

ENTER

MENU

RESET

COMPUTER

MY SOURCE/

AUTO

MAGNIFY

PAGE

      UP

VOLUME

DOWN

ON

OFF

FREEZE

Summary of Contents for PJL7211








































































Reviews: