Operation
57
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure you have turned on the corresponding menus under
SYSTEM SETUP: Basic
>
Standby Settings
, and the cable connections are correctly
made. For the connection methods, see the Connection chapter.
LAN Control
Select
On
when you wish to control the projector over a network when it is in standby
mode.
Microphone
Select
On
when you wish to use a microphone in standby mode. Be sure you have adjusted
the
SYSTEM SETUP: Advanced
>
Audio Settings
>
Microphone Volume
menu to a
desired level before the projector is turned off.
Active VGA Out
Selecting
On
outputs a VGA signal when the
COMPUTER IN 1
and
COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from
COMPUTER IN 1
.
Active Audio Out
Selecting
On
outputs an audio signal when the
AUDIO IN 1
and
AUDIO OUT
sockets are
correctly connected to devices. The projector outputs the audio signal received only from
AUDIO IN 1
.
Downloaded From projector-manual.com Viewsonic Manuals
