Operation
25
Entering the password recall procedure
1.
Press and hold
AUTO
on the projector or remote
control for 3 seconds. The projector will display
a coded number on the screen.
2.
Write down the number and turn off your
projector.
3.
Seek help from the local service center to decode
the number. You may be required to provide
proof of purchase documentation to verify that
you are an authorized user of the projector.
Changing the password
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Security
Settings
>
Change Password
menu.
2.
Press
MODE/ENTER
on the projector or
ENTER
on the remote control. The
message
'INPUT CURRENT PASSWORD'
is displayed.
3.
Enter the old password.
•
If the password is correct, another message 'INPUT NEW PASSWORD' is
displayed.
•
If the password is incorrect, the password error message is displayed lasting for
three seconds, and the message
'INPUT CURRENT PASSWORD'
is
displayed for your retry. You can press
MENU/EXIT
on the projector or
Exit
on the remote control to cancel the change or try another password.
4.
Enter a new password.
5.
Confirm the new password by re-entering the new password.
6.
You have successfully assigned a new password to the projector. Remember to enter
the new password next time the projector is started.
7.
To leave the OSD menu, press
MENU/EXIT
on the projector or
Exit
on the remote
control
.
The digits being input will be displayed as asterisks on-screen. Write your selected password
down here in this user manual in advance or right after the password is entered so that it is
available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this user manual in a safe place.
Disabling the password function
To disable password protection, go back to the
SYSTEM SETUP: Advanced
>
Security
Settings > Power On Lock
menu after opening the OSD menu system. Select
Off
by
pressing /
.
The message
'INPUT PASSWORD'
is displayed. Enter the current
password.
•
If the password is correct, the OSD menu returns to the
Security Settings
page
with
'Off'
shown in the row of
Power On Lock
. You will not have to enter the
password next time you turn on the projector.
•
If the password is incorrect, the password error message is displayed lasting for
three seconds, and the message
'INPUT PASSWORD'
is displayed for your
Please write down the recall code,
and contact ViewSonic
Customer Center.
Recall code:
0 2 1 2
RECALL PASSWORD
Exit
MENU
Downloaded From projector-manual.com Viewsonic Manuals
