ViewSonic PJD5353LS User Manual Download Page 50

Page: 50 / 84

Function

Description

Splash Screen

Allows you to select which screen will be displayed during

projector start-up.

My Button

Sets a hotkey on remote control.

Advanced

Pattern

The projector can display several test patterns. It helps you

adjust the image size and focus and check that the projected

image is free from distortion.

Message

Selecting

displays the current information on the screen

when the projector is detecting or searching for a signal.

Presentation Timer

See

"Setting the presentation timer" on page 31

for details.

High Altitude
Mode

See

"Operating in a high altitude environment" on page 33

for details.

DCR

Enables or disables the DCR (Dynamic Contrast Ratio)

function. Selecting

enables the function and the

projector will automatically switch the lamp mode between

normal and economic modes according to the input image

detected.

This function is only available when a PC input signal
is selected.

After enabling DCR, frequent lamp mode switching

may shorten lamp life and noise level will vary during
operation.

Audio Settings

See

"Adjusting the sound" on page 35

for details.

4. SY

ST
EM SE

TT
ING

BAS

IC menu

5.
SY
ST
EM S

ING:

VAN

ED
menu

Summary of Contents for PJD5353LS





















































































Search results

Summary of Contents for PJD5353LS

Reviews:

ViewSonic PJD5353LS, User Manual, Page: 50 / 84

Search results

Summary of Contents for PJD5353LS

Reviews: