32
3.
Highlight
Timer Period
and decide the time period by pressing
/
. The length of
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-
minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
4.
Press
to highlight
Timer Display
and choose if you want the timer to show up on
the screen by pressing
/
.
5.
Press
to highlight
Timer Position
and set the timer position by pressing
/
.
6.
Press
to highlight
Timer Counting Direction
and select your desired counting
direction by pressing
/
.
7.
Press
to highlight
Sound Reminder
and decide if you want to activate sound
reminder by pressing
/
. If you select
On
, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
8.
To activate the presentation timer, press
and press
/
to highlight
Start
Counting
and press
Enter
.
9.
A confirmation message displays. Highlight
Yes
and press
Enter
to confirm. You will
see the message “
Timer is On
” displaying on the screen. The timer starts counting
when the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the
SYSTEM SETTING: BASIC > Advanced > Presentation Timer
menu.
2.
Highlight
Off
. Press
Enter
. A confirmation message displays.
3.
Highlight
Yes
and press
Enter
to confirm. You will see the message “
Timer is Off
”
displaying on the screen.
Selection
Description
Always
Displays the timer on screen throughout the presentation
time.
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decreases from the preset time to 0.
Summary of Contents for PJD5353LS
Page 84: ......
