background image

4

Getting Started

ViewSonic 

PF77

E

N

G

L

I

S

H

Before Using the Monitor

Precautions

Read 

Precautions 

(on this page) and 

Power Cord Safety Guidelines 

(on

page 17).

Read 

Setting the Timing Mode 

on page 6 before you adjust the

ViewPanel. This will prevent you from making adjustments unnecessarily.

• For best viewing conditions sit at

least 18" from the monitor.

• AVOID TOUCHING THE SCREEN

WITH YOUR FINGERS. Oils from
the skin are difficult to remove.

• NEVER REMOVE THE REAR

COVER. The monitor contains high-
voltage parts. You may suffer
serious injury if you touch these
parts.

• Avoid exposing the monitor to

direct sunlight or another heat
source. The monitor should be
facing away from direct sunlight to
reduce glare.

• Choose a well ventilated area to position

your monitor. Do not place anything on
the monitor that prevents adequate
dissipation of heat.

• Always handle your monitor with  care

when moving it.

• Ensure the area around the monitor is

clean and free of moisture.

• Do not place heavy objects on the

monitor, video cable, or power cord.

CAUTION: 

If smoke, abnormal

noise, or strange odor is present,
immediately switch the monitor off
and call your dealer or monitor. It is
dangerous to continue using the
monitor in this condition.

Summary of Contents for PerfectFlat PF77



















Reviews: