73
3.5mm barrel connector
(alternative for limited
space)
Pin #
Signal
Remark
Tip
TXD
Output from Display
Ring
RXD
Input to Display
Sleeve
GND
10.2.2 LAN Hardware Specification
ViewSonic LFD communication port on the rear side
(1) Connector type: 8P8C RJ45
(2) Pin Assignment
Pin # Signal Remark
1
TX+
Output from Display
2
TX-
Output from Display
3
RX+
Input to Display
4
BI_D3+ For 1G case
5
BI_D3- For 1G case
6
RX-
Input to Display
7
BI_D4+ For 1G case
8
BI_D4- For 1G case
frame GND
10.2.3 RS232 Communication Setting
- Baud Rate Select: 9600bps (fixed)
- Data bits:
8 bits (fixed)
- Parity:
None (fixed)
- Stop Bits:
1(fixed)
10.2.4 LAN Communication Setting
- Type:
Ethernet
- Protocol:
TCP/IP
- Port:
5000 (fixed)
- Cross subnet:
No
- Logon Credentials: No
10.2.5 Command Message Reference
PC sends to LFD command packet followed by “CR”. Every time PC sends control
command to Display, the Display shall respond as follows:
1.
If the message is received correctly it will send “+” (02Bh) followed by “CR”
(00Dh)
2.
If the message is received incorrectly it will send “-” (02Dh) followed by “CR”
(00Dh)
Summary of Contents for IFP6560
Page 26: ...18...
Page 30: ...22 File Manager...
Page 63: ...55 Select pen thickness and type Change pen color Tool to draw line and different shapes...
Page 101: ......