19
•
VGA Connection
1.
Connect a VGA cable from your computer to the
VGA
port on the monitor.
2.
Connect the USB Type A to Type B cable from your computer to the monitor to
enable touch controls.
Type-C
Out
HDMI
HDMI
USB 3.0
5V/2A
VGA
VGA
When using the touch function, please note:
•
The touch function may need about five (5) seconds to resume if the USB
cable is removed and plugged in again, or the computer resumes from
Sleep Mode
.
•
The touchscreen can only detect up to ten (10) fingers simultaneously.
•
If the Windows’ cursor does not accurately follow your finger when you
touch the screen, do the following:
1.
Open:
Control Panel
>
Hardware and Sound
>
Tablet PC Settings
2.
Select
Calibration
.
3.
Follow the instructions to recalibrate your screen.
If Windows cannot identify the touch screen when you touch the screen, do the
following:
1.
Open:
Control Panel
>
Hardware and Sound
>
Tablet PC Settings
2.
Select
Setup
.
3.
Select
Touch Input
.
4.
Follow the instructions to identify the touch screen.
