ViewSonic
High Definition Media Receiver
43
When I connect the HDMR to my display, if there is no screen image or
the screen video not clear, what should I do?
This applies to the Component or HDMI ports only.
After you turn on the
HDMR
, press the
Output
button on the remote control and wait two (2)
seconds. If the video is still not clear, press the
Output
button again. If the screen image is still
not clear, press
Output
a third time.
To optimize the screen image
Select
Setup
from the
Home
page, then select
System
from the
Setup
menu. Use the
navigation buttons on the remote control to select an video setting from the table shown below >
press
OK.
For the best screen image, select your display’s Preferred Resolution (see your
display’s user manual).
What Windows operating systems support
myView
Media Manager
software?
Windows XP Home
and
Windows XP Pro Service Pack 2
.
Can I connect my HDMR to a 5.1 Surround Sound HDMR?
Yes. Use a digital audio coaxial cable (purchased separately) to connect your Surround Sound
system to the
HDMR’s
SPDIF port.
Video Settings
(resolutions) for
HDMI
Video Settings for
Component Video
(YPbPr)
480p
480p
720p
720p
1080i
1080i
S-Video/Composite
NTSC (Composite = CVBS)
Summary of Contents for HDMR-2000
Page 1: ...HDMR 2000 User Guide High Definition Media Receiver ...
Page 55: ......
