ViewSonic
High Definition Media Receiver
16
HDMI or Component Connection
1
If connected to HDMI or Component, press the
OUTPUT
button on the remote control to
toggle output signals until you see video on the TV.
2
If connected to the
HDMR
’s Component or HDMI port(s) to connect to the TV, you may need to
make the following adjustment:
If there is no screen image or the screen image does not look clear:
3
With the
HDMR
turned on, press the
Output
button on the remote control. Wait two (2)
seconds and if the image is still not clear, press the
Output
button again. If the screen image
is still not clear, press
Output
a third time. The
Output
button has a total of three (3) settings.
Choose
Setup
>
System
>
Video Setting
> choose your video source >
OK
> navigate/scroll
down to the bottom of the screen to select
SAVE
> click
OK
>
OK
to reboot (reboots
automatically).
Check your router settings, like SSID. Write them down if necessary because you may need
them.
HDMI
connection
Summary of Contents for HDMR-2000
Page 1: ...HDMR 2000 User Guide High Definition Media Receiver ...
Page 55: ......
