4
ViewSonic
E220
Quick Installation
1 Connect power cord
Connect the power cord to a properly
grounded AC outlet.
2 Connect video cable
Make sure both the monitor and computer
are powered OFF.
Connect the video cable to the computer.
Macintosh
®
users:
Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
®
Macintosh adapter,
contact ViewSonic. See “Customer Support”
on page 13.
3 Power-ON monitor and computer
Power-ON the monitor, then power-ON the
computer. This sequence (monitor before
computer) is very important.
NOTE:
At this point Windows
98 users may
receive a message asking them to install the
E220 INF file.
4 Install Display Optimization files
(INF and ICM files)
(1) Insert the ViewSonic Wizard CD-ROM
into your computer’s CD-ROM drive.
NOTE:
If your computer does not have a
CD-ROM drive, see “Customer Support” on
page 13.
4 Install Display Optimization files
(Continued)
(2) Wait for the CD-ROM to auto-start.
NOTE:
If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in
Windows Explorer, then double-click on
install.exe
.
(3) Follow the on-screen instructions.
5 Windows users: Set the Timing
Mode (resolution and refresh rate)
Example:
1024 X 768 @ 75Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card’s user
guide.
Installation is complete.
Installation is complete.
Enjoy your new
E220 monitor.
To be best prepared for any future customer
service needs: print this user guide and write
the serial number in
"For Your Records"
on
page 2. (See back of monitor.)
To register your product go online to
www.viewsonic.com
.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.
Video cable
Power cord
AC outlet
Power cable to computer
