19
Network settings
Assign {IP address}, {Subnet Mask}, and {Default
gateway} for the display.
Network settings
DHCP
IP address
Subnet mask
Default gateway
[ SET ]
MAC address
Enable
0
0
0
0
0
0
0
0
0
0
0
0
00:24:67:30:07:3E
•
DHCP - Choose to enable or disable the DHCP
function. If enabled, the display will be assigned
IP address, Subnet mask and Default gateway
automatically. If disabled, you will be prompted
to enter the following values manually. Press
select to [set] and [
OK
] button to store and save
the chosen values.
•
IP address
•
Subnet mask
•
Default gateway
•
MAC address.
Configuration1 reset
Reset all settings in the
Configuration1
menu to
factory preset values.
Factory reset
Reset all settings in the OSD menus of {
Picture
},
{
Screen
}, {
Audio
}, {
PIP
}, {
Configuration1
},
{
Configuration2
}, {
Advanced option
}, and
{
Input
} to the factor y preset values Press
[
]
or
[ ]
button to select {
Reset
}, and press [
OK
]
button to do the reset.
Factory reset
Cancel
Reset
5.2.6. CONFIGURATION2 menu
PIP
1
2
3
SET
MENU
2
:Move
:Select
OSD turn off
OSD H-position
OSD V-position
Information OSD
Monitor ID
Heat status
DP version
DP 1.1
10 Sec.
3
Monitor information
Configuration 2
:Exit
50
50
45
OSD TURN OFF
Set the period of time the OSD menu stays on the
screen.
The options are: {
0 ~ 120
} seconds.
OSD H-POSITION
Adjust the horizontal position of the OSD menu.
OSD V-POSITION
Adjust the vertical position of the OSD menu.
INFORMATION OSD
Set the period of time the information OSD
displayed on the upper right corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {
OFF
} selection.
The options are: {
OFF, 1 ~ 60
} seconds.
MONITOR ID
Set the ID number for controlling the display via
the RS232C connection. Each display must have
a unique ID number when multiple sets of this
display are connected. Monitor ID number range is
between 1 to 99.
Heat status
This function allows you to check the thermal
status of the display at any time.
Monitor information
Shows information about your display, including
model number and serial number.
Monitor information
Model Name:
Serial NO:
CDP9800-CN
Summary of Contents for CDP9800-CN
Page 58: ......