5.
[1] Control box
[2] Upper damping board
[3] Lower damping board
[4] FHD zoom camera
[7] Damping ball
[8] Yaw axis motor
[9] Roll axis motor
[10] TF card slot
[11] Pitch axis motor
[12] 3-6S power interface
[13] Micro HDMI interface
[15] Viewport unlock button
[14] Ethernet interface
[5] Infrared thermal camera
[6] laser rangefinder
2.2.1 Control Box Printing (Standard Version)
PI
TCH
Yellow Jumper Cap
TX
RX
GND
YAW
MODE
ZOOM
FO
CU
S
PIC/REC
MU
LTI
USB
AV
5V output
GND
1
2
3
Please ensure that there isn’t any obstacle while the
motor rotating.
Please remove the obstacle immediately if gimbal
camera is blocked during rotation.
Don't use laser ranging against glass within 5meters.
Don’t put the infrared thermal camera towards the sun,
magma, laser, etc. in case any burn to the camera.
