UNPACKING & INSTALLATION MODEL: VIO-20
Unpack the Instruments and save all packing materials. They are specially designed to
protect the Instrument and will make repacking easy if you ever need to ship your Indirect
Ophthalmoscope – VIO-20
After unpacking verifies the list of accessories us indicate below.
INSTALLATION
¾
The initial installation will be done by VIEWLIGHT Trained Engineers only. After
installation a performances check will be carried by VIEWLIGHT Engineers. Nobody
is authorized to install the Medical Equipment except VIEWLIGHT Engineers.
¾
Connect the Output of the power supply to the indirect ophthalmoscope.
¾
Ensure the intensity control in minimum position.
¾
Connect the power card to the power supply.
¾
Connect it to supply mains.
¾
Do not position the medical equipment to make it difficult to operate the
disconnection devices. (appliance coupler)
¾
Fix the indirect ophthalmoscope on head with proper position.
¾
Switch ON the power supply unit.
¾
Sliding Knob Intensity may be adjusted as required and proper inter pupil adjust.
¾
When it is not in use set the intensity control to minimum position and switch of the
equipment.
¾
Don’t close the equipment immediately with any cover wait until it cools and cover
with proper dust cover.
1. Binocular Indirect ophthalmoscope – VIO-20 2. Power Supply
3. Scleral Depressor
4. Funds Chart
5. Marking Pencil
6. Teaching Mirror
7. Power Card
8. Instruction Manual
12
Summary of Contents for VIO-20
Page 1: ......
