３．
Assembly instructions
１）installation
(1)
Installation conditions
·
Please place it in a place not subject to water.
·
Please place it in places where there is no fear of adverse effect due to air including
atmospheric pressure, temperature, humidity, ventilation, sunlight, dust, salt, ion content
etc.
·
Please pay attention to stable conditions such as inclination, vibration and impact.
·
Do not install in place of chemical storage or gas generation.
(2)
Assembly method
·
When installing, please adhere strictly to ensure that the environmental conditions at the
time of use are the following environmental conditions.
２）Assembly method
（１）for the first arm-based
①
clamp
（L-0940SD）
Stabilize the base with the handle firmly.
(Maximum table thickness:
70
mm)
②base（Ｋ-1422）
Pillar and base please tighten at the hexagon
bolt with a hole (4 screws).
（２）first arm
First arm installed Teflon washer and insert
into base.
The arm slowly insert vertically.
（３）second arm
No. 2 arm installed Teflon washer and insert
first arm.
The arm slowly insert vertically.
Environmental conditions
Temperature
＋１０℃～＋３５℃
Relative humidity
３０％～７５％
No.1 arm
No.2 arm
Teflon washer
No.1 arm
Teflon washer
base
pillar
