５．
Replacement consumables, cleaning, and storage
１）
Cleaning
(1)
Body
・
And use a neutral detergent if the body is dirty, wipe it with a soft cloth.
(2)
Operation knob Cap
・
Operation knob Cap (disinfection CAP) for the disinfection of all removable has become.
・
Carefully disinfected ago use.
After disinfection, the CAP is reusable.
・
Operating handle, degraded operation knob CAP be removed and replace with new ones.
(3)
Power cord (plug plug)
・
Wipe with cloth if the power cord is dirty with dust, oil, etc.
・
Water adheres to the power cord with a wet cloth, shock, becomes the cause of the fire.
(4)
Cooling fan
・ And wipe with dry cloth remove the cooling fan case cooling fan is dirty with dust, oil, etc..
(5)
Optical components
・ And use a cleaning fluid (ether 8: methanol 2) if fingerprints and dirt on the lens, mirror, gently wipe it with a
soft cloth.
・ If the dust is attached to the lens, mirror, please clean with a soft brush.
・ Cleaning of the lenses, mirrors, 3 x done remove from the zoom body.
・ Please note 10 minutes with lenses, mirrors, do not scratch.
２）
Replacement of consumables
(1)
Fuse replacement
Warning
Replacing the fuse, make sure main switch
"OFF" (O)
Then has become the fuse at high
temperature which may directly, do not touch with bare hands.
For high-temperature burns.
（１）to switch the power unit
"OFF" (O)
Then please.
（２）press the fuse holder to the left Rotate
And remove from the body.
（３）remove the fuse wire is cut, new fuse
Attach the fuse holder.
（４）Rotate the right press the fuse holder
Attach to the body.
３）
Storage and storage
(1)
How to store
・
The main switch must be
"OFF" (O)
It please.
・
Please remove from an electrical outlet power cord.
・
Of the body to prevent stains, take the dust cover.
(2)
Storage location
・
Keep the splashed water.
・
Harm caused due to air pressure, temperature, humidity, ventilation, sunlight, dust, salinity,
ion-containing keep them in unlikely places.
Fuse holder
