・
Tilt, shake, please note that shock and steady state.
・
Please do not store flammable gas and chemicals storage place.
(3)
Environmental conditions
During storage please adhere to the following conditions.
Storage conditions
Temperature
－１０℃～＋５５℃
Relative humidity
１０％～９５％
６．
Maintenance
Depending on operating conditions, May require parts replacement and repair.
Products normally used for the customer Please do the inspection of equipment and parts.
And also used for a long time, or long term storage after use, before using make sure
equipment successfully and safely activate when you check out.
１）
Routine inspection
Check (check daily) Please be careful before using be sure any abnormalities.
Inspection items Contents of inspection
How to set up and adjust
Lateral control of
the aircraft
To verify that the level horizontally at the body.
Aircraft
to
be
placed
horizontally.
Connecting the
cords
To verify that the code in all the earth connections are
accurate and complete.
Connected to ground, all of
the code.
Light
coaxial
illumination
To verify that the coaxial illumination light is set to the
appropriate value.
To set the light coaxial
illumination.
Each arm
To verify the movement arm is lighter and can be fixed in any
position.
To see the movement of each
arm.
２）
Periodic inspection
Products normally used for the 3-6 months once the monitoring
On a regular basis
Inspection
(inspection) Be sure Please.
Inspection items
Contents of inspection
How to set up and adjust
Check
coaxial
illumination
Make sure no lighting around the bluish light.
Make sure than the light can be set.
If abnormality is identified, please
contact dealer.
Check the fuse
Check to see if the fuse is not blown.
If abnormality is identified, refer to
the
procedures
for
fuse
replacement, replace the fuse.
No.
2
arm
movement
To verify that no. 2 arms to move up and down
gently, and stopped at any position, you can secure
the locking knob.
Fails if the second Adjustment of
arm clamping force See, moving
the arm up and down to adjust To.
Check mirror stand
out-degree
adjustable
mounting
Mirror stand level adjuster mounting nut, sure
enough.
Fails
if
the
mirror
stand
degreesAdjustment of the clamping
forceSee Mirror
stand
level
adjuster Of
coordinate
movements To.
No. 2 arms
Confirmation of the
mirror
with
a
President
The second nut arm mirror with a President before
any loosening.
If abnormality is identified, the
mirror head rotation Adjustment of
the clamping force Adjust the
mirror head rotation movement,
see To.
