BR
- 4
5
Method 2-
Searching this unit for Pairing “from a other Bluetooth Device ”.
(1) Set the other Bluetooth device which need to be paired with this unit into
“Searching” mode .
(2) When searching is completed, “BT70” should appear in the Bluetooth device,
select “BT70' & confirm to start the pairing process.
(3) Once the
and the device name is displayed on this unit, press the
ENTER (AUDIO) button to confirm & start the pairing.
(4) Password Input: user can input minimum 1 & up to maximum 4 of any numeric
number between 0 to 9, as the password for this unit.
(5) Press the MODE button to confirm the password input, and the Pairing process
should start.
(6) In the pairing Bluetooth device, user should input the same password which was
input as above in step 4.
(7) If the pairing is successful, the display will display
and the
Bluetooth device's name. If the pairing failed, will be displayed
for 3 seconds, and the unit will automatically switch back to the previous mode.
a. To allow this unit searching by the other device, the “VISIBILITY” in the
MENU of BT must be set to “SHOW”. Please refer to MENU of BT for more
details of how to set the “VISIBILTY” mode.
b. Please refer to the instruction manual of your Bluetooth device on how to
enter into the Bluetooth device searching mode.
Please make sure to keep the pairing Bluetooth device within 2 meters from
this unit when making the pairing.
Tips
To cancel the pairing, user can press the “CLEAR” (BAND) button at any time.
a. If this unit is connected to a Bluetooth device, this unit cannot be detected
(searched) by another Bluetooth device. User should first disconnect the
current connected device, in order to allow this unit to be detectable /
searchable by another Bluetooth device.
b. During the Pairing, only the Clear, /- & Mute buttons are functional,
all the other function keys are disabled & non-operational during the pairing
mode.
Connecting – User Can Dis-connect Or Re-connect With The
Paired Bluetooth Device By Following Operation
Once any Bluetooth device is paired with this unit, user can select this Paired
device to be connected or dis-connected, this is called “Connecting”.
(1) Every time the ignition key is turned from off to on, this unit will automatically
reconnect with the last connected Bluetooth Device.
(2) Every time when user short press the MODE button to confirm the dialing of an
outgoing call, this Unit will automatically reconnect with the Mobile Phone once
(Only if this Mobile Phone has been paired with the unit previously).
However in some conditions, user needs to reconnect manually. For example:
(1)This unit lost the connectivity with the Mobile Phone or the Bluetooth device.
1. Re-Connection:
This unit will automatically Reconnect with the paired device in the following
conditions.
Summary of Contents for VPC55BT
