VIETA VH-IS150SL, User Manual

Page: 18 / 32

iPad/iPod/iPhone Speaker
18
Set the Alarm Timer
You can set two alarms which go off at different time.
1. Ensure that you have set the clock correctly.
2. Press and hold
ALARM 1
or
ALARM 2
, [AL1 ] or
[AL2 ] begin to blink.
3. Press

/

on the remote control to select an alarm
sound source: iPod/iPhone/iPad, FM tuner, or buzzer.
4. Press ALARM 1 or ALARM 2 . The hour digits
begin to blink.
5. Press

/

repeatly to set the hour.
6. Press
ALARM 1
or
ALARM 2
. The minute digits
begin to blink.
7. Repeat steps 5-6 to set the minute.
8. Repeat steps 5-6 to select whether to ring alarm
the whole week, on weekdays, or at weekend.
9. Repeat steps 5-6 to set the alarm volume.
Activate and Deactivate the Alarm Timer
Press ALARM 1 or ALARM 2 repeatly to activate or
deactivate the timer.
- If the timer is activated, [AL1 ] or [AL2 ] is
displayed.
- If the timer is deactivated, [AL1 ] or [AL2 ]
disappears.
Repeat Alarm
You can press to adjust the interval to repeat alarm.
When the alarm rings, press SNOOZE/DIMMER . The
alarm repeats ringing 9 minutes later.
Stop Alarm Ring
When the alarm rings, press the corresponding
ALARM 1 or ALARM 2 . The alarm stops but the
alarm settings remain.
View the Alarm Settings
Press ALARM 1 or ALARM 2 to view the alarm
settings.
Set the sleep timer
This unit can switch to standby automatically after a
set period of time.
1. Press
SLEEP
repeatedly to select a set period of
time (in minutes).
- When the sleep timer is activated, the display show,
the volume will gradually decrease before the unit
power off.
2. Press
SLEEP
repeatedly until [OFF] is displayed.
- When the sleep timer is deactivated, disappears
on the display.
Adjust Display Brightness
Press DIMMER repeatedly to select different levels
of display brightness.
Adjust Volume Level
During play, press the VOL +/- buttons to increase/
decrease the volume level.
Select a Preset Sound Effect
During play, press the EQ button repeatedly to
select: [FLAT], [Pop], [Classic], [Rock], [Jazz].
Mute Sound
During play, press the MUTE button to mute or
restore sound. Press this button again to cancel the
effect.
Play from iPod/iPhone/iPad
iPod/iPhone/iPad Operation
Using the iPod/iPhone/iPad dock, you can use the
unit to play music files stored on your iPod/iPhone/
iPad.
Listen to the iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad through
this unit.
1. Press down on the
PUSH
logo on the docking
cover of the unit to flip the docking cover up.
2. Insert your iPod/iPhone/iPad into the iPod/iPhone/
iPad dock.
3. Press the Dock button on remote control or
SOURCE button on top panel to select the iPod/
iPhone/iPad source.