VIETA VH-IS150SL, User Manual

Page: 17 / 32

17 ENGLISH
Install Batteries
Note:
• You can only use AC power as power supply.
Batteries ( not supplied ) are for backup
purpose.
• If the system is unplugged or if a power
failure occurs, all setups of the unit will be
erased unless there are batteries in the unit
and don’t change them at this time. Once
setups had be erased, please resetup all items
( tuner stations; Source... ) which you desire.
1. Open the batteries compartment.
2. Install two AAA batteries(not supplied) with correct
polarity and the install steps as indicated.
3. Close the battery compartment.
Connect Power
Caution:
- Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
- Before connecting the AC power cord, ensure you
have completed all other connections.
Connect the AC power cord to the wall socket.
Power
You can use all the functions on the top of the unit or
the remote control after connecting to power supply
(called Standby Mode).
Turn On
Press
ON/OFF
button to turn the system on from
standby mode.
Press ON/OFF/SOURCE to select different functions.
Turn Off
Press and hold ON/OFF button on the unit or press
the button on the remote control again to turn the
system off and go to standby mode.
Set Time
The built-in clock shows the correct time in the
display.
1. In standby mode, press and hold the CLOCK
button for some seconds, hour indicator will blink.
2. Set the hour with the

button or

button.
3. Press the
CLOCK
button to confirm, minute
indicator will blink.
4. Repeat steps 2-3 to set the minutes, day, month
and year.
General Operation
When turning the system on, the system will
continue in the mode it was in when it was
turned off last time.
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
In standby mode, press and hold the CLOCK
button for some seconds, then press the
button to select 12/24 hour format.