VIETA CCM4000R Owner'S Manual Download

Page: 33 / 33

ERROR 1

Write Error

Read Error

Memory Full

No File

Disc Error

The Media Device not able to
copy or record by the unit.

The Media Device not able to
play file by the unit

The media device memory is
full not allow to copy

No  file  Format  supports  for
Playback  on  the  disc  or
Media  Device

Maybe disc dirty / disc scratched
/disc upside down.

Press  the  reset  button  to  correct  the  problem.
If  the  error  code  does  not  disappear,  consult
your  nearest  service  dealer.

Replace the disc or Media Device..

Replace the disc.

Replace the Media Device or
Format the Flash Memory

Replace the Media device or erase
some un-usage files.

Symptom

Cause

Solution

No power

The car ignition is not on.

If the power supply is properly connected

to the car accessory terminal, switch the

ignition key to “ACC”

Disc cannot be
loaded or ejected

The fuse is blown.

Replace the fuse.

Presence of CD disc inside
the player.

Remove the disc in the player, then
put a new one.

Inserting the disc in reverse
direction.

Insert the compact disc with the
label facing upward.

Compact disc is extremely
dirty or defective disc.

Clean the disc or try to play a new one.

Temperature inside the car is
too high.

Cool off or until the ambient temperature
returns to normal.

Condensation.

Leave the player to off for an hour or so,
then try again.

Volume is in minimum.

Adjust volume to a desired level.

Wiring is not properly
connected.

Check wiring connection.

The operation keys
do not work

No sound

The built-in microcomputer is
not operating properly due to
noise.

Press  the  RESET  button.
Front  panel  is  not  properly  fixed  into
its  place

Sound skips.

The installation angle is
more than 30 degrees.

Adjust the installation angle to less
than 30 degrees.

The disc is extremely dirty or a
defective disc.

Clean the compact disc or try to play a
new one.

The antenna cable is not
connected.

Insert the antenna cable firmly.

The signals are too weak.

Select a station manually.

The  radio  does  not
work.
The  radio  station
automatic  selection
does  not  work.

22.TROUBLE SHOOTING

Before going through the check list, check wiring connection. If any of the problems persist
after check list has been made, consult your nearest service dealer.

E - 32

Mechanism Error

Replace the Media Device or
Format the Flash Memory

Summary of Contents for CCM4000R


































Search results

Summary of Contents for CCM4000R

Reviews:

Related manuals for CCM4000R

Brands by name

Popular brands

VIETA CCM4000R, Owner'S Manual

Search results

Summary of Contents for CCM4000R

Reviews:

Related manuals for CCM4000R

Brands by name

Popular brands