background image

E  -  10

Format 

This  feature  is  used  to  delete  all  the  files  in  the  Built  in  Flash  Memory  or  to  initialize  the  Built  in 
Flash  Memory  in  case  it  has  some  abnormal  playing.  Once  accessed  into  Format  Mode  while 
the  'Flash'  is  blinking.  Rotate  the  volume  control  to  enter  into  the  confirm  format  interface,  the 
“          ”  will  blink  and    press  AUDIO  button    to    activate  the  format  flash  memory,  or  rotate  volume 
control  to  select

  for  cancel  the  Format    mode.     

  “              ”  as

The  Format  mode  is  only  able  access  into  under  Tuner  ,  Flash  Memory,  AUX  In    playback 
mode.  Under  playing  other  mode  like  CDP  or  USB  or  Memory  Card,  “Format”will  not 
appear  in  the  Menu  List.

Free  Recordable  Memory  (

ROM

 

FLASH) 

This  feature  allows  to  check  the  remaining  capacity  of  the  Built  in  Flash  Memory.
The  approximate  recordable  remaining  free  rom  size  will  be  displayed  once  access  into 
Free  Rom  Mode  by  press  AUDIO  button.                                                                                                                                           

The  operation  must  be  perform  under  Flash  Memory  playing  mode

Summary of Contents for CCM4000R


































Reviews: