A Hunter Industries Company
Problem
Lamps have a
yellow or golden
tone
Cause
Voltage too low
Solution
Move affected cable to the next higher voltage tap or reduce
load on cable. If possible, run additional cable to first fixture
to reduce voltage loss.
Problem
Lamp goes on and
off when fixture is
moved
Cause
Too much tension on socket leads
Solution
With spring type sockets, it is important to leave some slack
so the socket contacts make a good connection to the lamp
base.
Problem
System is getting
dimmer with age
Cause
Splices are corroding
Solution
As non-waterproof splices corrode, they create electrical
resistance, which reduces voltage.
Problem
Photocell
transformer is
coming on too soon
Cause
Transformer is in dark location
Solution
In order to operate properly, the photocell must have a good
look at daylight. Move to a brighter location.
Problem
Fixtures have a
white mineral
deposit on them
Cause
Irrigation water is hitting them
Solution
Schedule the irrigation to come on after the lights have gone
off. This is especially true with the 50 W spots
— very hot.