11
5 Contact information
Viessmann Werke GmbH & Co. KG
35107 Allendorf
Germany
Fax +49 64 52 70-27 80
Phone +49 64 52 70-0
[email protected]
www.viessmann.de
See also page 22.
Commissioning
The commissioning and matching of the appliance to
local conditions and building characteristics, as well as
instructing the user in the operation of the system,
must be carried out by your contractor.
As the user of new combustion equipment, you may be
obliged to notify your local flue gas inspector of the
installation [check local regulations]. Your local flue gas
inspector will also inform you [where appropriate]
about work that may have to be carried out on your
combustion equipment (such as regular checks, clean-
ing).
Serial number of internal electricity meter
You will find the serial number of the internal electricity
meter on a label behind the upper front panel: See
page 28.
This information is required when registering the
Vitovalor PA2 with your grid operator.
Your system is preset
Your system is preset at the factory and is therefore
ready for operation following commissioning by your
contractor:
Wintertime/summertime changeover
■
This changeover is automatic.
Date and time
■
The date and time were set by your heating contrac-
tor.
You can change the settings at any time to suit your
individual requirements.
Power failure
All settings are saved if there is a power failure.
Power generation
Power generation takes place according to the specifi-
cations provided by the integral energy manager. The
start times of the fuel cell module are matched to the
power consumption conditions.
Introductory information
Software licences
(cont.)
5839344
Summary of Contents for Vitovalor PA2
Page 42: ...42 5839344 ...
Page 43: ...43 5839344 ...
