36
Heating circuit 1, 2, 3
"Operating program"
■
"Screed drying"
■
"Remote device connected"
■
"Holiday program"
■
"External program"
■
"Comfort mode"
■
"Economy mode"
■
"Heating and DHW"
■
"DHW only"
■
"Standby mode"
"Operating status:"
■
"Standard heating mode"
■
"Reduced mode"
■
"Standby mode"
"Time program"
"Room temperature"
"Set room temperature"
"Red. ROOM TEMP Set"
"Ext. ROOM TEMP Set"
"Comfort temp. Set"
"Slope"
"Level"
"Heating circuit pump"
"Mixer"
"Flow temperature"
"Holiday program"
DHW
"DHW time prog"
"DHW circ time prog"
"DHW temp."
or
In conjunction with 2 cylinder temperature sensors:
"DHW temperature top"
"DHW temperature bottom"
"DHW circulation pump"
"Cylinder loading pump"
Solar energy
"Solar energy history"
"Collector temp"
"Solar DHW"
"Solar circuit pump"
(hours run)
"Solar energy"
"Solar circuit pump"
(ON/OFF)
or
"Solar pump circ speed"
"Heating suppr. DHW"
"SM1 output 22"
(ON/OFF)
"SM1 output 22"
(hours run)
"Sensor 7"
"Sensor 10"
"Heating suppr. heating"
Terminology
Setback mode (reduced heating mode)
See "Reduced heating mode".
Operating program
With the operating program, you specify:
■
Central heating and DHW heating
or
■
DHW only, no central heating
or
■
Only frost protection for the boiler and the DHW cyl-
inder is active.
No central heating, no DHW heating
Note
No operating program is available for central heating
without DHW heating. When you want central heating,
hot water is generally also required (winter mode).
Operating status
In the operating program
"Heating and DHW"
, the
operating status changes from "Standard heating
mode" to "Reduced heating mode" and vice versa. The
times at which the operating status is changed over
are defined by you when setting the time program.
Extension kit for heating circuit with mixer
Assembly (accessories) for controlling a heating circuit
with mixer, see "Mixers"
Screed drying
Your heating contractor can activate this function for
screed drying, for example in your new build or exten-
sion. This means your screed is dried in line with a
fixed time program (temperature/time profile) that is
appropriate for the building materials used.
Appendix
Scanning options under "Information"
(cont.)
5546 498 CA
