21
Setting "Holiday program"
Note
The holiday program affects
all
heating circuits.
If you want to make changes to this, contact your local
heating contractor.
The holiday program starts at 00:00 h the day after the
departure date. The holiday program ends at 00:00 h
on the return date. This means that the set time pro-
gram is active on the days of departure and return.
Tap the following buttons:
1. "Menu"
2. "Heating"
3. "Heating circuit 1"
,
"Heating circuit 2"
or
"Heat-
ing circuit 3"
as the required heating circuit
4. "Holiday program"
Heating circuit 1 holiday program
OK
Return date
Monday
Departure date
Tuesday
16/06/2014
10/06/2014
Fig. 17
5.
/ for
"Departure date"
and
"Return date"
6.
Press
OK
to confirm
The holiday program has the following effect:
■
Central heating
:
–
For heating circuits in the operating program
"Heating and DHW"
:
The rooms are heated to the set reduced room
temperature (see page 17).
–
For heating circuits in the operating program
"DHW only"
:
No central heating. Frost protection for the boiler
and the DHW cylinder is active.
■
DHW heating
:
No DHW heating. Frost protection for the DHW cylin-
der is active.
Cancelling or deleting the "Holiday program"
Tap the following buttons:
1. "Menu"
2. "Heating"
3. "Heating circuit 1"
,
"Heating circuit 2"
or
"Heat-
ing circuit 3"
as the required heating circuit
4. "Holiday program"
Heating circuit 1 holiday program
OK
Return date
Wednesday
Departure date
Wednesday
01/01/2014
01/01/2014
Fig. 18
5.
for
"Return date"
the same date as for the
"Departure date"
6.
Press
OK
to confirm
Central heating
Energy saving function "Holiday program"
5546 498 CA
