19
Depending on various outside temperatures (shown on
the horizontal axis), the assigned set flow tempera-
tures for the heating circuit are highlighted in white.
Stopping central heating
Tap the following buttons:
1. "Menu"
2. "Heating"
3. "Heating circuit 1"
,
"Heating circuit 2"
or
"Heat-
ing circuit 3"
as the required heating circuit
4. "Operating program"
5. "DHW only"
(no central heating)
or
"Standby mode"
(frost protection for the boiler and
the DHW cylinder is active)
6.
Press
OK
to confirm
Comfort function "Comfort mode"
Setting "Comfort mode"
Tap the following buttons:
1. "Menu"
2. "Heating"
3. "Heating circuit 1"
,
"Heating circuit 2"
or
"Heat-
ing circuit 3"
as the required heating circuit
4. "Comfort mode"
Heating circuit 2 comfort mode
Comfort mode
OK
Fig. 15
5. "Comfort mode"
6.
Press
OK
to confirm
7.
/ for the required set room temperature in com-
fort mode
8.
Press
OK
to confirm
■
The rooms are heated to the required temperature.
■
Provided your heating contractor has not altered the
settings, DHW is heated to the selected set tempera-
ture
first
, before central heating begins.
■
The DHW circulation pump is switched on (if instal-
led).
Ending "Comfort mode"
Tap the following buttons:
1. "Menu"
2. "Heating"
3. "Heating circuit 1"
,
"Heating circuit 2"
or
"Heat-
ing circuit 3"
as the required heating circuit
4. "Comfort mode"
5. "Comfort mode"
The white frame is reset.
6.
Press
OK
to confirm
or
Central heating
Heating curve
(cont.)
5546 498 CA
