19
Altering the Time Program for the DHW Recirculation Pump
(continued)
Setting individual heating cycles each day of the week
Automatic?
Time Prog. DHW Recirc.
Pump
1---7
Time Prog. DHW Recirc.
Pump
Mo
1
Mo
1. Open flip-down cover of remote
control.
2.
for “Time Program DHW
Recirculation Pump“,
wait unit display shown on
the left appears.
3.
for “Individual?”.
4.
to confirm.
5.
/
for selecting the day of the
week when switching
should take place.
6.
for “DHW Recirculation
Pump Cycle 1”.
7.
for “DHW Recirculation
Pump Cycle 1 On”.
8.
/
for entering the start of
Cycle 1.
9.
to confirm;
the display switches to
“DHW Recirculation Pump
Cycle 1 Off”.
10. /
for entering the end of
Cycle 1.
11.
to confirm;
the display switches to
“DHW Recirculation Pump
Cycle 2 On”.
12. For setting starting and ending
times for Cycles 2 to 4 proceed as
described in steps 6 to 10.
13. Close flip-down cover of remote
control.
Accessing heating cycles
Proceed as describe above, with the
exception of pressing buttons
and
.
Overview of heating cycles
1. Open flip-down cover of remote
control.
2. Press
and
simultaneously;
the selected cycles for the given day
are shown on a time line.
3. Close flip-down cover of remote
control.
If you would like to terminate the
heating cycle settings prematurely,
press
again.
If you would like to skip a heating
cycle, press .
Once the last setting is confirmed
with
the display will show the
current time.
51
67
50
5
