10
Central Heating
Terminating the Holiday Program
The holiday program terminates automatically when the end time has been reached.
If you want to terminate the holiday program early:
1. Open the flap
2. Press twice
3. Use to select
"Holiday"
4.
Confirm with
OK
5. Use to select
"OFF"
Changing the Room Temperature for a Few Hours Only
The following functions enable you to change the room temperature for a few hours without
permanently altering you settings.
The modified room temperature remains enabled until the next changeover within a program or
until the next switch to a different program.
If you want an unscheduled increase in room temperature:
• In programs
"Prog 1"
to
"Prog 3"
and
"Manual"
, you can increase the room temperature with
or
• In programs
"Prog 1"
to
"Prog 3"
, select party mode by pressing
If you want an unscheduled reduction in room temperature:
• In programs
"Prog 1"
to
"Prog 3"
and
"Manual"
, you can lower the room temperature with
or
• In programs
"Prog 1"
to
"Prog 3"
, select economy mode by pressing
Using to Make Adjustments
1. Press or
The current set room temperature is displayed
2. Use to set the required temperature
3.
Confirm with
OK
or wait approx. 5 seconds until the value is adopted automatically
Setting Party Mode
In party mode, the reduced room temperature is automatically set to 21°C.
1. Press for approx. 5 seconds
The display shows
2. Use to set the room temperature for party mode
3.
Confirm with
OK
Ending Party Mode
Party mode ends automatically at changeover to the next time phase of the time program
Press again for approx. 5 seconds if you want to terminate party mode early
