Viessmann VITOPURE, Manual Book

Page: 6 / 40

DESKRIPSI PRODUK
DATA TEKNIS
Perangkat ini dipasang setelah meteran air dan sebelum perangkat filter lainnya. Ini merupakan proses pertama dari
penyaringan di dalam rumah. Jaring berbahan anti karat di dalam penyaring digunakan untuk menahan kotoran seperti
endapan lumpur, karat, dan bahan padat lainnya yang ada di dalam air. Pencucian sebaiknya dilakukan untuk mengeluarkan
kotoran dari pipa saluran secara rutin. perangkat ini memiliki regulator untuk bisa menstabilkan tekanan air, dan
menghindari tekanan air yang besar secara tiba tiba/ pressure gauge di atas perangkat dapat mengukur tekanan air pada
outlet.
Vitopure S1-M Regulated Pre-filter Water Purifier
Vitopure S1-M Regulated Pre-filter Water Purifier
Inlet water : Air PAM & Air sumur
Filter material : Stainless steel filter mesh
Filtration flow : 83 liter/menit
Working pressure : 1 - 16 Bar
Water inlet and outlet pipe : DN20
Drain pipe : DN10
Working temperature : 1 - 39ºC
CONTROL OPERATION
Description of controller panel
and buttons
Set number of days in a rinse
Set rinse times
Set the specific time of starting rinse program
LCD Backlight
LCD backlight may be turned on by touching any button.
LCD backlight may be turned off automatically without
any button operation within 10 seconds
S
D
Numeric
value
Working
status
Setting
button
Rinse time
Number of days in an
automatic rinse cycle
Press START to start
rinse
Press START again to stop
rinsing and return to
working state
Work
Rinse
Set
Low
Voltage
Press and hold the "SET" button for more than 2 seconds and release it when the "SET" program is displayed. Enter
the"SET" program and display the number of days in current automatic rinse cycle.
Each time press the "SET" button once, the number of days will increase by one day. The range of the number of days is
set 0 to 30 days. After the number of days reaches 30, it will return to 0 automatically.
When the value is set to 0, automatic rinse function will be turned off. Manual rinse function is still available at this
moment.
The number of days will be displayed on the screen after the input is completed. Please wait for 10 seconds. Do not press
any button until the "Work" program is displayed.
After the number of days is input, press the "START" key without waiting for 10 seconds, then set the number of days in
an automatic rinse cycle and enter into the rinse time setting program. Display the currently-set rinse time, such as "60
seconds".
Each time you press the "SET" button, the rinse time will increase by 1 second. The range of the seconds setting value is 0
to 99. After the number of days reaches 99, it will return to 0 automatically.
The number of seconds will be displayed on the screen after the input is completed. Please wait for 10 seconds. Do not
press any key until "Work” program is displayed.
When the rinse seconds is set, wait for 10 seconds and do not press any button until the "Work" status is displayed and
the rinse seconds are set. The screen displays the number of days of the set rinse cycle, such as "8 days"”.
When the program is displayed in the rinse seconds setting state, press the "Set" key to enter the setting state of the
automatic rinse cycle and save the set seconds.
1.
2.
3
4.
1.
2.
3
4.
5.
Work
SET SET
D
Quickly press the
SET button once
to add 1 day to
the number of
days.
D D
SET START SET START
SET START
SET START
Press the
SET button for 2
Seconds to enter
the state of setting
thenumber
of days.
Quickly press the
SET button once to
add 1 day to the
number of day
SET SET
Work
S
D
Quickly press
the SET button
once to
increase the
number of days
by 1. Press
continuously to
accumulate the
number of days.
Wait for 10
seconds, do
not press any
button and
return to
working state.
The setting of
8 days and 61
seconds is
completed.
S
If it is required to start the automatic rinse at a specific time of the day, just reset the number of days at the moment. Wait for 10
seconds after entering the "Set" interface for number of days.
SET START SET START SET START
Quickly press
the SET button
once to increase
the number of days
by 1. Press
continously to
accumulate the
number of days
Wait fo 10
seconds, do not
press any button
and return to
working state the
setting of 8 days
and 61 second is
complete
EN
ID
6 35