Viessmann VITOPURE, Manual Book

Page: 30 / 40

PEMASANGAN PRODUK
CATATAN :
Pemasangan Inlet air dengan arah inlet
secara horisontal dan vertikal S1-A
Ketika posisi pipa inlet terpasang secara horisontal
sesuaikan arahnya dengan mengikuti tanda panah yang ada
diflange body. Demikian halnya jika vertikal,
sesuaikan flange
body dengan mengikuti arah air guna menyesuaikan dengan
instalasi pipanya sampai rapat, pasang baut ke flange
tersebut dan kencangkan dengan kunci L yang sudah
disediakan.
Pasang quick joint di inlet dan outlet dari flange body
dan pasang quick joint ring saat instalasi.
Setelah unions sudah dibaut pada inlet air dan outlet air
dari flange body, kencangkan dengan kunci Inggris.
Ada dua unions, satu panjang dan satu pendek.
Keduanya dapat dipasang di inlet ataupun outlet dari
flange body saat perangkat dipasang secara horizontal.
Pressure gauge
Quick plug drain joint
Power adapter socket
Flange gasket
Flange body
Water inlet and outlet
direction arrow
Short
union
Water
inlet
Flange fixed
hexagon socket
bolt
Water
outlet
Long Union
Vertical Horisontal
Pressure gauge
Quick plug drain joint
Power adapter socket
Water outlet
Flange body
Flange hexagon
socket bolt
Water
inlet
Short
union
Water inlet and outlet
direction arrow
FLange gasket
PRODUCT INSTALATION
NOTES :
Installation of drain pipe
Insert the quick-plug drain joint into the drain outlet of the device.
Insert one end of the drain pipe into the quick-plug drain joint and the other end into the vertical drain pipe.
Properly discharge the waste water discharged during sedimentation and rinse through a drain pipe.
It is recommended to provide floor drain near the device,water outlet of washing machine and vertical drain
pipe.
Cut the drain pipe in proper length by the actual needs. It isavoided to be longer than 3m.
Drain pipe should be as less curved as possible.
All types of valves shall not be installed in drain pipe.
The drain pipe must be fastened, because water will flowout of the sewage outlet at a high velocity during
rinse. The drain pipe should be inserted into the vertical drain pipe, but must not be inserted to the end. The
drain pipe should be sealed with sealant in its surrounding area.
Insert the pipe to the
drain channel.
Drain outlet
Masukan quick ke outlet
saluran pembuangan
Drain outlet
Vertical drain pipe
Floor drain
11 30
ID
EN