Viessmann Vitoligno 250-S, Operating Instructions Manual

Page: 25 / 56

25
4.
Ù
/
Ú
To select "Heating circuit 1" (HC1), "Heat-
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3).
5.
|
/
~
For "Operating program" .
6.
d
To confirm.
7.
|
/
~
For "Standby mode" .
8.
d
To confirm. The display briefly shows
"Standby mode" .
Comfort function "Party mode"
With this comfort function you can change the room
temperature of a heating circuit for a few hours, e.g. if
you have guests staying until late in the evening. You
do not have to change any existing control settings for
this. ■ The rooms are heated to the required temperature.
Selecting "Party mode"
Heating circuit 1
Economy mode
Select with
(
Party mode
Heating program
Set room temp.
Þ
ON
Ù Ú
HC1
Fig. 22
Press the following keys:
1.
ä
Repeatedly, until the standard menu is dis-
played.
2.
|
/
~
For "Heating" .
3.
d
To confirm.
4.
Ù
/
Ú
To select "Heating circuit 1" (HC1), "Heat-
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3).
5.
|
/
~
For "Party mode" .
6.
d
To confirm.
The room temperature during party mode is
shown in the display.
7.
|
/
~
For the required temperature, if you want to
change the value.
8.
d
To confirm.
"Adopted" appears briefly on the display. In
the subsequent menu, "On" appears on the
right-hand side of the display.
Terminating "Party mode"
Party mode ends automatically with the next change-
over to central heating with standard room tempera-
ture, but no later than after 8 hours.
To terminate party mode prematurely, press the follow-
ing keys:
1.
ä
Repeatedly, until the standard menu is dis-
played.
2.
|
/
~
For "Heating" .
3.
d
To confirm.
4.
Ù
/
Ú
To select "Heating circuit 1" (HC1), "Heat-
ing circuit 2" (HC2) or "Heating circuit 3"
(HC3).
5.
|
/
~
For "Party mode" .
6.
d
To confirm.
"Off" appears briefly in the display. In the
subsequent menu, "Off" appears on the
right-hand side of the display.
Central heating
Stopping the central heating
(cont.)
5684 987 GB