Ash vacuum cleaner
WSZ 2210
WS
DS
Only available as cleaning set
Nominal diameter of permanently installed pipe-
work for the flue gas extraction system
from the ash vacuum cleaner to the pre-separa-
tor
NW
Permanently installed pipework
is not permissible
76
76
Nominal diameter of permanently installed pipe-
work for the flue gas extraction system
from the pre-separator to the suction point
NW
Permanently installed pipework
is not permissible
76
76
Max. height differential
from the suction point to the pre-separator
m
Permanently installed pipework
is not permissible
5
10
Ash vacuum cleaner accessories
Vacuum gun, DN 50
For part no., see pricelist
The vacuum gun is connected with the metal hose. It is used to
clean the heat exchanger pipes. For this purpose, the cleaning brush
is attached to the vacuum gun, and the vacuum gun to the heat
exchanger pipe. Movement of the cleaning brush cleans the surfa-
ces, whilst the dirt is removed by the ash vacuum cleaner.
Vacuum hose, plastic, DN 50
The vacuum hose can be used for general cleaning. It is
unsuitable
for hot ash.
For part no., see pricelist
Available vacuum hoses
■ Vacuum hose, plastic, 3 m long
■ Vacuum hose, plastic, 5 m long
Vacuum hose, metal, DN 50
The vacuum hose can be used for general cleaning and to clean the
boiler.
For part no., see pricelist
Available vacuum hoses
■ Vacuum hose, metal, 2 m long
■ Vacuum hose, metal, 3 m long
■ Vacuum hose, metal, 5 m long
Boiler room cleaning accessory set
For part no., see pricelist
Standard delivery
■ Vacuum hose, plastic, DN 50, 3 m, including connection
■ Bent mouth piece, DN 50
■ Hand-held pipe, 1 m
■ Terminal piece for industrial floors, 500 mm with rubber strip
■ Coarse suction nozzle
■ Crevice nozzle, 500 mm, metal
■ Circular brush, 100 mm, V2A
Pipe, DN 76 for permanent installation of the flue gas extraction
system
For part no., see pricelist
Pack for permanently installed pipework (9 m) for the flue gas
extraction system, including installation materials.
Note
The pipe can also be provided on site. This requires a connection
set.
Standard delivery
■ 9 m pipe, DN 76
■ 3 pce 90° bend
■ 8 pce pipe joiner
■ Installation materials for fixing (every 2 to 3 m)
Connection set for pipe connections
For part no., see pricelist
Standard delivery
■ 1 pce coupling for pipe terminal, DN 50
■ 1 pce coupling for pipe terminal, DN 76
■ 2 pce coupling for pipe start, DN 76
■ 1 pce pipe reducer from DN 76 to DN 50
■ 1 pce vacuum hose connection piece, DN 50
■ 3 pce vacuum hose connection piece, DN 76
■ 3 pce vacuum hose, metal, DN 70, 2 m long
Accessories for mobile cleaning equipment, ash containers
Ash container 90 l, reserve
For part no., see pricelist
Ash container 240 l, reserve
For part no., see pricelist
Cyclone cover for 240 l ash container
For part no., see pricelist
The cyclone cover is intended for the connection of the ash vacuum
cleaner hoses to the ash container. It is equipped with a spark
arrestor [sieve]. Ventilation air and extract air connections, DN 76
800 l ash container with cover
For part no., see pricelist
Standard delivery
■ 800 l zinc-plated ash container with hinged cover
■ Cover gasket
■ Ventilation air and extract air connection to the cover (DN 76)
■ Spark arrestor [sieve]
Installation accessories
(cont.)
VITOFLEX 300-UF
Viesmann
39
5682428
4
