32
Emissions test mode for testing flue gas with briefly
raised boiler water temperature.
Emissions test mode should only be activated by your
flue gas inspector during the annual inspection.
Extended menu
1.
2.
"Test mode"
3.
"Activate?"
"Yes"
"Flue gas test ON"
Test mode
Terminate with
OK
Boiler temperature
62°C
Fig. 31
The following functions are activated:
■
The burner is switched on. The display shows the
symbol .
Note
Burner start-up can be delayed, e.g. due to con-
nected components.
■
The pumps are started.
■
The mixers remain set to the control function.
■
The boiler water temperature is monitored by the
boiler control unit.
Note
The flue gas inspector can also activate emissions test
mode if the controls have been locked by your heating
contractor.
Ending emissions test mode
■
Automatically after 30 minutes
or
■
Press
OK
.
Emissions test mode
Emissions test mode
5814953
Summary of Contents for VITOCROSSAL CI
Page 46: ...46 5814953...
Page 47: ...47 5814953...
