9
Your Vitocom 100 is preset at the factory.
Your heating contractor has made further settings for
you during commissioning.
Standby
Provided the following requirements have been met,
the Vitocom 100 is ready for operation. You can use
the Vitocom 100 if (see page 14):
■
Your heating contractor has installed the equipment.
■
Your heating contractor has connected the KM BUS
of the Vitocom 100 to the control unit.
■
The SIM card has been inserted. The PIN has been
entered.
■
The power supply has been connected.
■
Reception quality indicator "2" illuminates or flashes
according to the reception quality (see page 11).
■
The following LED indicators illuminate green: mobile
network connection status "3" and operating status
indicator "4".
Power failure
All settings are saved if there is a power failure.
Only for prepaid SIM cards:
If an end date for the SIM card validity (enddat, see
page 23) has been entered, an SMS alert is sent to
the 1st and 2nd mobile phone number after a power
failure. The SMS alert requests the current date to be
re-entered (akdat, see page 21).
Introductory information
Your device is preset at the factory
5782 277 GB
