background image

136

Heating program changeover

Code

No heating program changeover

F2:0

Duration of the heating program changeover 1 to 12 hours

F2:1 to
F2:12 

The heating program changeover stays
enabled for as long as the contact
remains closed, but at least as long as
the duration selected in coding address
"F2".

External blocking

The "External blocking" and "External
blocking and fault message input" func-
tions are connected via extension EA1.
There are 3 inputs available at extension
EA1 (DE1 to DE3).

The function is selected via the following
codes:

External blocking

Code

Input DE1

3A:3

Input DE2

3b:3

Input DE3

3C:3

External blocking and fault message input

Code

Input DE1

3A:4

Input DE2

3b:4

Input DE3

3C:4

The effect on the internal circulation
pump is selected with code 3E.

The effect on the relevant heating circuit
pump is selected with code d6.

External demand

The "External demand" function is con-
nected via extension EA1. There are 3
inputs available at extension EA1 (DE1
to DE3).

The function is selected via the following
codes:

Function description

Control functions

 (cont.)

5412 755 GB

Summary of Contents for FB2B









































































































































































Reviews: