33
Fig. 30
Neutralising system installation instructions
1.
Site the neutralising system either behind or adja-
cent to the boiler.
2.
Trim the plastic hose supplied to the required
length. Connect the hose to the trap and the neu-
tralising system.
3.
Connect the neutralising system to the drainage
system.
Connections on the flue gas side
B
A
C
D
Fig. 31
Flue system installation instructions
1.
The boiler flue connection accessory is essential
for making the flue connection.
2.
Push collar
D
onto the flue gas connection of the
flue gas collector.
3.
Fit boiler flue connection
C
.
4.
Tighten hose clip
A
on the collar.
5.
Connect the flue outlet with the shortest possible
run to the chimney, maintaining a slight incline.
Avoid sharp kinks.
Note
A sealable test port
B
is fitted to the boiler flue con-
nection.
Danger
Leaks can result in poisoning through escaping
flue gas.
Ensure that gaskets are seated correctly.
Connecting the neutralising system
5816716
Summary of Contents for CRU
