Vitodens 200-W B2HA/B2HB, 222-F B2TA/B2TB Operating
5461 885 - 04
30
Scanning
Scanning Information
Subject to the connected components and settings
made, you can scan current temperatures and operating
conditions.
The extended menu splits the information into groups:
H
“General”
H
“Heating circuit 1”
H
“Heating circuit 2”
H
“Heating circuit 3”
H
“DHW”
H
“Solar”
H
“Reset data”
Note:
If heating circuits have been given names, the name
is displayed (see chapter “Entering names for the
heating circuits”). For detailed scanning options
for the individual groups, see chapter “Scanning
options in the extended menu”.
Extended menu:
1.
2. “Information”
3. Select the category.
4. Select the required scan.
Scanning in conjunction with solar thermal systems
Extended menu:
1.
2. “Solar
energy”
The solar energy yield for the past 7 days is displayed
on a graph.
The flashing line on the graph indicates that the current
day is not yet over.
Note:
Further scanning options, e.g. for the solar circuit
pump hours run, can be found in the extended
menu under “Information” in the “Solar” group.
Resetting data
You can reset the following data:
H
Burner hours run.
H
Fuel consumption, if set by your heating contractor.
H
In conjunction with a solar thermal system:
Solar energy yield, solar circuit pump hours run and
hours run output 22.
H
All the above data simultaneously.
Extended menu:
1.
2. “Information”
3. “Reset
data”
