16
Heat pump/heating circuit settings
Setting temperatures
The "Normal temperature" is the required room temperature in "Normal"
operating mode.
The "Reduced temperature" is the required room temperature in "Reduced"
operating mode.
Heat pump 1
[ºC]
Current op. mode
: Standard
Normal temperature
:
20.0
Reduced temperature
:
16.0
Timer/switching times
Too warm/too cold
±
°
+0.1
0.1
STANDA
BACK
Heat pump 1
[ºC]
Current op. mode
: Standard
Normal temperature
:
22.0
Reduced temperature
:
16.0
Timer/switching times
Too warm/too cold
±
°
+0.1
0.1
STANDA
BACK
Open the programming unit flap and
press the following keys:
1.
C
for
"Programme"
.
2.
A
for
"Heat pump"
or
C
for
"Mixer 1"
.
3.
°
/
±
press until the required
temperature
is highlighted:
"Normal
temperature"
or
"Reduced
temperature".
4.
+0.1
/
−0.1
press until the required
temperature value is
shown.
The "Reduced
temperature" may not
be set higher than
"Normal temperature".
5.
BACK
press to confirm.
Close the programming unit flap.
Please note:
You can change these temperatures
with the rotary selectors "
m
" and
"
s
" (see page 9).
5592
415GB
