Loosen the screw with the Allen key (SS 2).
Screw the adjusting screw (SS 11) into the valve as far as it will go;
at the same time, hold the spindle (SS 6) tight.
Tighten the screw again with the Allen key (SS 2).
Position the handwheel as marked and mount the lid.
ð
The circulation regulation valve is now ready for use.
3.2.6
Leakage test
The installer must perform a leakage test before commissioning.
Carry out this test on a system that is finished but not yet covered.
Handling
Easytop circulation regulation valve, static regulation valve with SC-Contur
24 from 25
