Fig. 3: Protected zones
According to the applicable regulations, installation of the power pack in
the protected zones 0 and 1 of shower rooms and bathrooms is not per‐
„Regulations from section: Fields of application /
Mounting conditions“ on page 5
.
Viega recommends installing the power pack outside of the protected
zones 0–2.
3.1.2
Required material and tools
The following material is required for mounting:
n
if necessary, empty pipe from power pack into the cistern
3.2
Assembly
3.2.1
Setting the flush
The smallest possible flush volume must be set at the
drain valve in the cistern.
The flush volume is set via the DIP switch of the drive unit.
Material
Handling
Electronics accessory set
11
