Insert the old threaded bolts so deeply that the upper edge of the
threaded bolt sticks out approx. 9 mm in front of the upper edge of
the tiles.
Fasten threaded bolts with a 90° turn.
Screw the actuating rods into the threaded holes of the mechanism.
Shorten the actuating rods with a knife.
The top actuating rod must project 11 mm beyond the upper edge
of the tiles.
The bottom actuating rod must project 5 mm beyond the upper
edge of the tiles.
Insert the support in the basic panel.
Re-mounting the old flush plate
Handling
Drain valve set
14 from 15
Summary of Contents for 8310.0
Page 2: ...Drain valve set 2 from 15...
