Controls and Functions
6
Vidikron Vision Model 65/Model 75 Installation/Operation Manual
5.
POWER/STANDBY LED
Indicates power status as follows:
• Orange when the projector is in standby mode
• Flashes green for approximately 45 seconds after the projector is turned on to indicate
that the lamp is warming up
• Green during normal operation
• Flashes orange for approximately 110 seconds after the projector is turned off to
indicate that the lamp is cooling down
• Red when an internal failure requiring service has occurred
6.
TEMP LED
Indicates fan status and internal temperature as follows:
• Off during normal operation
• Red when internal temperature is too high or a fan failure occurs
7.
INTAKE VENT
8
.
VIDIKRON LOGO
The logo can be rotated to match the projector
orientation: inverted (ceiling-mounted) or upright.
To rotate the logo, grip it at the sides, pull it away
from the projector and rotate it 1
8
0 degrees.
9.
FRONT IR SENSOR
10.
PROJECTION LENS
To adjust the focus, grasp the lens by the outer ring and rotate it.
Summary of Contents for Vision 65
