Operation
Vision Model 140/150 Installation/Operation Manual
79
PRE
L
IMINAR
Y
System Reset:
To reset ALL projector and controller settings (including image settings) back
to their factory defaults, choose System Reset from the Service menu.
A confirmation message appears, reminding you to save your settings before you perform
the reset, so that you can restore them afterwards. If you have done this, select Confirm to
continue with the reset. Otherwise, click Back to cancel.
Restore Saved Settings:
Following a System Reset, select Restore Saved Settings to apply all
previously-saved settings to the projector and VHD Controller.
This action is not undoable. Proceed with caution!
Before you perform a
System Reset, save ALL settings, including “Custom” ISF Presets (page 73), ISF
Day/Night presets (page 75), Output Shift settings (page 75), Input Names
(page 76) and Trigger settings (page 78).
Caution
Summary of Contents for Vision 140
