Vidikron Model 70 Owner'S Operating Manual Download Page 16

Page: 16 / 90

Introduction

Vidikron Vision 70 Series Owner’s Operating Manual

PRE

IMINAR

Key Features and Benefits

The Vision 70 offers these key features and benefits:

• Native Resolution: 1920 x 10

0 (16:9 Native Aspect Ratio)

• DLP system using high-performance Digital Micromirror Device (DMD)

•

-segment, 5x color wheel produces wide dynamic range and rich grayscale

• V

Aperture Control (VAC) provides for infinitely variable adjustment of the light path

through the optics, enabling the perfect balance of black and white levels for each
individual installation

• Picture in Picture / Picture by Picture functions allow you to display two inputs on the

screen at the same time

• HDMI Input with High-bandwidth Digital Content Protection (HDCP)

• HDTV Compatible

Parts List

Your Vision 70 is shipped with the following items. If any items are missing or damaged,
please contact your Vidikron dealer or Vidikron Customer Service at (

888

) 4VIDIKRON.

• Vision 70 DLP Projector

• Remote Control Unit and two (2), AAA-size batteries

• AC Power Cords (North America, Europe, Asia)

• Source Connection Cables:

• Composite Video

• S-Video

• Component Video

• RGB (DB15HD-to-5 x BNC)

• HDMI to HDMI

• HDMI to DVI

• +12-volt Trigger Cable (3.5-mm, mini phono plug to two bare wires)

• Warranty information and registration card

• Vidikron Vision 70 Series Owner’s Operating Manual (this document)

Optional Accessories:

• CineWide™ technology (fixed, secondary anamorphic lens)

• CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized mount)

• Ceiling mount kit for Vision 70 or Vision 70/CineWide (part number VIHK-000425)

• Ceiling mount kit for Vision 70/CineWide with AutoScope (part number VIHK-000175)

➤

Summary of Contents for Model 70



























































































Search results

Summary of Contents for Model 70

Reviews:

Related manuals for Model 70

Brands by name

Popular brands

Vidikron Model 70, Owner'S Operating Manual

Search results

Summary of Contents for Model 70

Reviews:

Related manuals for Model 70

Brands by name

Popular brands