Operation
Vidikron Vision
8
5 Owner’s Operating Manual
59
PRE
L
IMINAR
Y
• Vidikron/ISF Logo Splash Screen Timers:
When you turn on the Vision
8
5, it projects a
welcome screen with the Vidikron logo followed by one with the ISF logo. Select Splash
Timer from the Splash Configure menu to set the amount of time that these two images
appear. The range is from 2 to 60 seconds, in one-second increments.
Use the up or down cursor button to select a timer value to adjust. Use the right or left
cursor button to change the timer value. Press
MENU
when you have finished configuring
both timers.
OSD Position:
Select OSD Position, press
ENTER
and use the arrow buttons to change the
size and position of the OSD controls.
Service
Use the Service menu to access advanced projector configuration settings.
This menu
should be used by ISF-certified technicians only.
Test Video:
Select Test Video from the Service Menu to access the internal test patterns on
the Vision
8
5. Four patterns are available, consisting of white/gray or colored bars.
Press
MENU
to exit test pattern mode.
Input Names:
You can give each VHD Controller input a descriptive name. For example, you
may want to change the default input name to the type of source component connected to
it: “VCR,” “DVD,” “Laptop” et cetera. Composite, S-Video and Component SD input names can
be up to 12 characters long; the others can be up to eight characters long.
To edit an input name, select Input Names from the Service menu. Press
or
to select an
input and press
ENTER
. Use the
or
buttons to change a character; press
or
to
select a character to change. When you have finished editing the input name, press
MENU
.
To restore the default input name, press
repeatedly to highlight that input name in the
“Restore” column. Then, press
ENTER
.
To save input names so that they can be restored after a System Reset (described on
page 62), press
repeatedly to highlight “Save.” Then, press
ENTER
.
Service
Test Video
Input Names
Remote Control
Display Device
HD Format
Triggers
Miscellaneous
System Reset
Restore Saved Settings
You must enter a passcode to access the Service menu.
Note
Input Names
Restore
Composite
Composite
S Video 1
S Video 1
S Video 2
S Video 2
Component SD
Component SD
HD/RGB 1
HD/RGB 1
HD/RGB 2
HD/RGB 2
HDMI 1
HDMI 1
HDMI 2
HDMI 2
Save
The
button takes you from top to bottom in the left column, then from
top to bottom in the right column. To highlight “Save,” scroll through
both columns.
Note
