Fax Server ISDN manual ©-Vidicode 2006
22
2.3 Connecting to E1 primary rate ISDN
This only applies to the model for ISDN primary rate.
The Fax Server PRI is connected in series with the PBX. With the Fax
Server PRI you have received a cable with two RJ45 connectors. This cable
is used to connect the Fax Server PRI to the wall socket. The existing cable
can be used to connect the Fax Server PRI to the PBX as is shown in the
figure below.
It is possible that you do not want to connect the PBX together with the Fax
Server on one line because you want to use the line for faxing only. In this
case the PBX and the connection to it are not there.
It is also possible that you want to use all 30 channels of the E1 line for
faxing. In this case a second Fax Server PRI can be connected in place of
the PBX.
