Videx ESVK, Installation Handbook

Page: 23 / 44

66550070-EN - V6.5 - 15/06/21
- 23 -
ESVK/KRV782 Series “2 wire Bus” videokit
ESVK/KRV782 Series - Installation handbook
Art. KRV782
7” Hands free videomonitor
A B
C D
E E F
Fig. 1 Front
G H I
L
Fig. 2 Back
DESCRIPTION
Intelligent Hands free video monitor for the VX2300 digital sys-
tem using a 7” 800x480 pixel resolution full colour active matrix
LCD monitor with capacitive touch sensitive buttons for “door
open/concierge call” , “answer/camera recall”, “auxiliary service“,
“privacy” plus 4 buttons for adjustment and programming and
2 LED’s related to the videophone operation. 2 LED’s indicating
the door open/close status (requires an additional wire) and the activation/deactivation of the privacy are also inclusive. The video-
monitor includes an intercommunication facility that enables intercommunication between devices in the same apartment (same
PHONE ID but different extension address) or between devices installed in different apartments (different PHONE ID). Programming
and settings are available through the touch buttons. Adjustable speech and melody volume, picture brightness and hue, program-
mable number of rings, privacy service duration, melody and the extension ID for intercommunication.
LEGEND
A
Microphone
B
Display
C
“Door Open” LED
D
“Privacy ON” LED
E
Touch buttons
F
Loudspeaker
G
8 Way dip switch bank
H
4 Way dip switch bank
I
Connection terminals
L
Bus termination switch
OPERATION
DURING STAND-BY
Camera recall
Press a number of times equal to the ID value of the door panel to switch ON.
When the connection is made, press again to end the call.
Intercommunication call
Press as many times as the extension number (intercommunication with units in the same apartment) or address value
to call (intercommunication with units in a different apartment).
Active bus relay board Art. 2305
Press this button quickly as many times as the address value of the relay (1 “beep” for each press).
Privacy service
Press to enable the privacy service. The LED turns on. The service is deactivated by pressing again the same button or
when the programmed time expires.
Melody volume
Press to increase or decrease the melody volume.
R02A