VideoWave n-E4E, User Manual

Page: 54 / 73

54
6. Log Viewer
======================================= = = = = = = = = = = = = = = =
„ This function is used to search data or check the log by retrieving the event signal.
„ Click the “Event Search” button in the main window to start.
[Event Search Function]
„
Event Search – Select the “Motion” and
“Sensor” events.
„ Select the event, select a date to
search, and then click the “Inquire”
button to see the events.
„ Select an event to see the relevant
search image.
„ Search with the direction buttons.
„
To save or print an image, use the
same method explained earlier in the
search section.
(Note: AVI files cannot be saved.)
[Event Log Viewer]
„
This function is used to inquiry the log
data generated while operating the system.
„ Retrieves the system log (powered
status of the system, and watch dog)
„ Retrieves the camera log (powered
status of camera)
„ Retries the network access (network
log and IP)
„ Retrieves the notification made.
„ Retrieves the network alarms.
9 This log data can be used to check the operability of functions generated while
operating the system.
9 The history is created in C:\Program files\DVR\Log\, and maximum 4Mbytes can be
saved.
9 If there are no saved images, the event cannot be searched irrespective of the
existence of the log data.